Powder Coating Recovery Cyclone

Công ty TNHH Sơn DOSA provides information about the construction, reference pricing, function, and operating notes for a cyclone used in a powder coating recovery system.

Powder coating recovery cyclone

Specifications of the powder coating recovery cyclone

• Fabrication material: CT3 steel
• Diameter: ø560
• Height: 3500mm (from the base to the top of the motor)
• Motor: 4 – 5Kwh – 380v, speed 2900 rpm

How much does a powder coating recovery cyclone cost?

The price of a powder coating recovery cyclone varies according to its size, capacity, supplier, and order quantity. A standard cyclone is typically priced at approximately VND 10–25 million. Larger systems or custom designs may cost more. For an accurate quotation based on the required configuration, contact the DOSA parts and materials team through the technical hotline at 0969 429 222.

What are the benefits of using a powder coating recovery cyclone?

• Recovery of powder for reuse, which can reduce material consumption, particularly when higher-value powder coatings are used.
• Reduced powder dispersion: The cyclone separates part of the powder from the airflow and supports control of the powder entering subsequent recovery stages.
• Support for a cleaner spray area: Appropriate collection of excess powder can reduce the amount circulating outside the controlled section of the system.
• Support for dust control in the work area: The cyclone should be combined with a powder booth, ductwork, filters, and suitable personal protective measures to limit powder exposure.
• Convenient inspection and maintenance: Operators should monitor duct sealing, motor condition, the collection hopper, and areas where powder may accumulate.

Benefits of using a powder coating recovery cyclone

What should you note when using a powder recovery cyclone?

To support effective and reliable cyclone operation, users should note the following points:

• Select a suitable capacity: Avoid choosing a cyclone that is too small or unnecessarily large for the production scale.
• Clean it periodically: Regularly clean the collection hopper and inspect the air ducts.
• Check system sealing: Prevent air leakage that could reduce powder collection performance.
• Use suitable powder coating material: Poor or contaminated powder may contribute to blockages and reduced filtration performance.
• Maintain the equipment according to the manufacturer’s recommendations: Follow the operating and maintenance instructions provided for the equipment to support stable operation and service life.

Important operating notes for a powder coating recovery cyclone

Where can you buy a genuine powder coating cyclone?

When selecting a cyclone, businesses should compare the airflow rate, powder characteristics, duct dimensions, and configuration of the existing recovery system. DOSA supplies equipment and materials and provides technical support for powder coating systems; customers may send drawings, photos, or operating requirements for review.

DOSA helps customers review product identification, origin information, and supporting documents before ordering. Quotations are prepared according to the cyclone configuration, technical requirements, and actual scope of work.

The product comes with a warranty of up to 12 months to give customers greater confidence during use. The cyclone is described as available from stock to support customer orders. Based on these points, DOSA invites customers to consider its powder coating parts and equipment supply.

Genuine powder coating cyclone from DOSA

See also:

• Paper powder recovery filter with practical pricing
• Plastic powder recovery filter — genuine DOSA product at a good price

A powder coating recovery cyclone should be selected according to the airflow rate, powder type, powder booth configuration, and associated filtration system. For help reviewing the technical requirements and requesting a quotation, contact DOSA technical support on Zalo at 0969 429 222.